Why does the stain appear far from where the water came in?
Water follows the path of least resistance along the framing and the decking, and it drops where it finds a gap or a low point. The stain on the ceiling is the place the water left the structure, not the place it entered.
A rafter is a sloped beam, and water running along the top of a rafter or the underside of the decking will travel downhill until it finds an opening. Insulation slows the water down but also holds it, so the water spreads across a wide area before it drips. A ceiling stain can appear several feet from the entry point, and the stain may be the last place the water reaches after a long rain.
That is why the crew starts in the attic and works down rather than the other way round. Measuring up from the ceiling stain can lead to the wrong part of the roof. Following the wet line through the insulation and along the framing gives a much better picture of the entry, and the photographs taken along the way show the route for whoever repairs the roof.
What happens to the insulation and the ceiling board?
Insulation that has soaked up roof water is removed, because it holds moisture against the framing and does not return to its original performance. Ceiling board is cut back to sound material when it is soft, stained or sagging.
Wet insulation weighs more and compresses, and it keeps releasing moisture to the framing around it for a long time. Pulling it out is usually faster and safer than trying to dry it in place. The crew bags it, photographs the area before and after, and notes the depth of the wet layer, because that depth is one of the facts a claim will ask about.
Ceiling board that is stained but still firm may be dried and kept, depending on the readings and the look of the surface. Board that has sagged or softened is cut out in a clean rectangle so the repair can be finished later without tearing the surrounding material. The cut lines are kept consistent, which makes the work easier for whoever closes the ceiling.
What drives the price of a roof leak job up or down?
How far the water traveled through the attic, how much insulation and board have to come out, how accessible the framing is, and whether the roof is still letting water in. The price is explained and approved before work starts, and the roof repair is priced separately by the roofer.
The spread of the water is the first driver. A leak that wet one rafter bay and a small patch of ceiling is a different job from one that ran down three rafter bays and into two rooms. The crew measures that spread in the attic on the first visit, and each additional area is shown in the file before the work on it begins.
Access matters as well. An attic with a clear hatch and open framing is quicker to work than one with ductwork, stored boxes and a narrow crawl. A roof that is still leaking when the crew arrives means the drying has to wait until the opening is covered or repaired, and that changes the sequence. The price is explained and approved before any of this work starts.
Should I cover the ceiling or wait for the roofer?
Protect the room and the contents now, and let the roofer repair the opening before the ceiling is closed. Closing a wet ceiling traps moisture against the framing and hides the readings that the next visit needs.
Under a leak, the first useful step is a container and a sheet of plastic beneath the drip, with the furniture moved clear. Photograph the stain, the drip point and any marks on the walls, and write down the time of the storm. Those notes help both the roofer and the insurer understand how the water came in.
Once the roofer has sealed the entry, the wet framing still needs to be dried and measured before the ceiling is replaced. Closing the ceiling early is the most common reason a second stain shows up months later. The crew hands over the readings so the next trade knows when the structure is ready to be closed.